Just as much as half of the energy used in your home goes to heating and air conditioning. So generating savvy decisions in regards to the home’s heating, ventilating, and air conditioning (HVAC) system could have a big effect on your utility charge — and your comfort. Take these methods to further improve the economy of your heating and air conditioning product.
Change your air filter often
Inspect your filter on a monthly basis, especially throughout heavy use times – the winter season and summer months. If the air filter seems to be dirty after a month, change it. At a minimum, remove and replace the air filter every three months. A dirty air conditioner filter is likely to impede air flow and make the a/c work overtime to keep you warm or cool — losing electric energy. A fresh air conditioner filter will also protect against dust and dirt from gathering within the unit — inflicting expensive maintenance and repair and/or premature system breakdown.
Setup a programmable thermostat – A programmable thermostat is designed for people who are far from home in the course of set periods of time across the seven days. By means of effective use of pre-programmed settings, a programmable thermostat will save you about $225 every year in electric power costs.
Investigate into Appropriate Setting up of your new unit
Swapping old heating and ac devices with brand new, economical types is a wonderful start. However to make sure you get the best efficiency, the new device needs to be properly installed. The truth is, wrong set up will work at reducing system efficiency by as much as 25 percent — costing you even more on your electrical power bills and quite possibly shortening the equipment’s life.
Seal up your heating and ac ducts
Ducts that push air to and from a forced air furnace, central ac, or heat pump are usually major energy wasters. Closing and insulating ducts can improve the effectively of your heating and ac solution as much as 20 % — and sometimes significantly more.
Place emphasis primarily on sealing ducts which go in the attic, crawlspace, unheated basement, or garage. Use pipe sealant or alternatively metal-backed strip to seal up the joints and connectivity of ducts. After sealing the ducts in such spaces, wrap them in insulating material in order to keep them from being hot during summer or cold in the winter. Following that, look to seal up some other ducts that you can get access to in the warmed or cooled area of the house.
If your HVAC unit is more than 10 years old or otherwise keeping your home or apartment comfortable, have it verified by a high quality Heating and air conditioning contractor. Provided it isn’t working competently or requires upgrading, give consideration to replacing it with a system which has received the energy economy seal of certification.